#include #include #include #include "BMP085.h" #include "Chronodot.h" #include "DHT.h" #include "TSL2561.h" #include "WebServer.h" #define TIMEZONE 7200 // 2 hours #define DHTPIN 2 #define DHTTYPE DHT22 #define PREFIX "" #define NTP_PACKET_SIZE 48 static uint8_t mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; static IPAddress ip = IPAddress(192, 168, 1, 210); static IPAddress timeserver = IPAddress(192, 43, 244, 18); P(indexHtml) = "Station Météo" "" "" "

Station Météo

" "" "

Temps	T [°C]	P [Pa]	Alt [m]	Hr [%]	Lx [lux]
0	0	0	0	0	0

" "

Intervale de mise à jour (en secondes) :

" "" ""; // no-cost stream operator as described at // http://sundial.org/arduino/?page_id=119 template inline Print &operator <<(Print &obj, T arg) { obj.print(arg); return obj; } BMP085 bmp; Chronodot chronodot; DHT dht(DHTPIN, DHTTYPE); TSL2561 tsl(TSL2561_ADDR_FLOAT); WebServer webserver(PREFIX, 80); byte packetBuffer[ NTP_PACKET_SIZE]; EthernetUDP Udp; void defaultCmd(WebServer &server, WebServer::ConnectionType type, char *url_tail, bool tail_complete) { server.httpSuccess(); server.printP(indexHtml); } void sensorsJsonCmd(WebServer &server, WebServer::ConnectionType type, char *url_tail, bool tail_complete) { float temperature = bmp.readTemperature(); int32_t pressure = bmp.readPressure(); float altitude = bmp.readAltitude(); uint32_t lum = tsl.getFullLuminosity(); uint16_t lightIr = lum >> 16; uint16_t lightFull = lum & 0xFFFF; DateTime time = chronodot.now(); server.httpSuccess("application/json"); server << "{ \"sensors\": [" << "{\"data\":\"" << time.hour() << ":" << time.minute() << ":" << time.second() << " " << time.day() << "/" << time.month() << "/" << time.year() << "\"}," << "{\"data\":" << temperature << "}," << "{\"data\":" << pressure << "}," << "{\"data\":" << altitude << "}," << "{\"data\":" << humidity << "}," << "{\"data\":" << tsl.calculateLux(lightFull, lightIr) << "}" << "] }"; } // Taken from http://arduino.cc/en/Tutorial/UdpNtpClient . void sendNTPpacket() { // set all bytes in the buffer to 0 memset(packetBuffer, 0, NTP_PACKET_SIZE); // Initialize values needed to form NTP request // (see URL above for details on the packets) packetBuffer[0] = 0b11100011; // LI, Version, Mode packetBuffer[1] = 0; // Stratum, or type of clock packetBuffer[2] = 6; // Polling Interval packetBuffer[3] = 0xEC; // Peer Clock Precision // 8 bytes of zero for Root Delay & Root Dispersion packetBuffer[12] = 49; packetBuffer[13] = 0x4E; packetBuffer[14] = 49; packetBuffer[15] = 52; // all NTP fields have been given values, now // you can send a packet requesting a timestamp: Udp.beginPacket(timeserver, 123); //NTP requests are to port 123 Udp.write(packetBuffer,NTP_PACKET_SIZE); Udp.endPacket(); Serial.println("Sending ntp packet"); delay(1000); if ( Udp.parsePacket() ) { // We've received a packet, read the data from it Udp.read(packetBuffer,NTP_PACKET_SIZE); // read the packet into the buffer //the timestamp starts at byte 40 of the received packet and is four bytes, // or two words, long. First, esxtract the two words: unsigned long highWord = word(packetBuffer[40], packetBuffer[41]); unsigned long lowWord = word(packetBuffer[42], packetBuffer[43]); // combine the four bytes (two words) into a long integer // this is NTP time (seconds since Jan 1 1900): unsigned long secsSince1900 = highWord << 16 | lowWord; // Unix time starts on Jan 1 1970. In seconds, that's 2208988800: const unsigned long seventyYears = 2208988800UL; // subtract seventy years: unsigned long epoch = secsSince1900 - seventyYears + TIMEZONE; Serial.println("Adjusting time"); chronodot.adjust(DateTime(epoch)); } } void setup() { Serial.begin(9600); //----- Ethernet/WebServer Serial.println("INIT Ethernet"); Ethernet.begin(mac, ip); webserver.begin(); webserver.setDefaultCommand(&defaultCmd); webserver.addCommand("sensors.json", &sensorsJsonCmd); //----- Sensors Serial.println("INIT Sensors"); bmp.begin(); dht.begin(); tsl.begin(); chronodot.begin(); // You can change the gain on the fly, to adapt to brighter/dimmer light situations //tsl.setGain(TSL2561_GAIN_0X); // set no gain (for bright situtations) tsl.setGain(TSL2561_GAIN_16X); // set 16x gain (for dim situations) // Changing the integration time gives you a longer time over which to sense light // longer timelines are slower, but are good in very low light situtations! tsl.setTiming(TSL2561_INTEGRATIONTIME_13MS); // shortest integration time (bright light) //tsl.setTiming(TSL2561_INTEGRATIONTIME_101MS); // medium integration time (medium light) //tsl.setTiming(TSL2561_INTEGRATIONTIME_402MS); // longest integration time (dim light) Udp.begin(8888); sendNTPpacket(); } void loop() { webserver.processConnection(); delay(500); }